In Situ Monitoring of Pulsed Laser Annealing of Eu-Doped Oxide Thin Films.

Eu3+-doped oxide thin films possess a great potential for several emerging applications in optics, optoelectronics, and sensors. The applications demand maximizing Eu3+ photoluminescence response. Eu-doped ZnO, TiO2, and Lu2O3 thin films were deposited by Pulsed Laser Deposition (PLD). Pulsed UV Laser Annealing (PLA) was utilized to modify the properties of the films. In situ monitoring of the evolution of optical properties (photoluminescence and transmittance) at PLA was realized to optimize efficiently PLA conditions. The changes in optical properties were related to structural, microstructural, and surface properties characterized by X-ray diffraction (XRD) and atomic force microscopy (AFM). The substantial increase of Eu3+ emission was observed for all annealed materials. PLA induces crystallization of TiO2 and Lu2O3 amorphous matrix, while in the case of already nanocrystalline ZnO, rather surface smoothening0related grains' coalescence was observed.

Insoluble hyaluronan films obtained by heterogeneous crosslinking with iron(III) as resorbable implants.

We present water-insoluble hyaluronan films crosslinked by trivalent iron developed as potential resorbable implants. The films were crosslinked by sorption of ferric salt into solid HA films in water/2-propanol bath. These heterogeneously crosslinked films (het-FeHA) remained tough and dimensionally stable when rehydrated in saline. In contrast, films prepared by drying the well-known homogeneous ferric hyaluronate gels (hom-FeHA) softened upon rehydration and expanded rapidly. Differences between hom-FeHA and het-FeHA result from polymer network topology (dominant inter- or intra-molecular crosslink, respectively). Moreover, Mössbauer spectroscopy of het-FeHA revealed diiron complexes, while iron in the hom-FeHA was present exclusively as γ-FeOOH nanoparticles or amorphous FeOOH. The biocompatibility tests of het-FeHA did not show any adverse effect and the sample disintegrated within one day when implanted in mice peritoneum. In conclusion, we developed implantable hyaluronan-based free-standing film with minimal swelling that can be resorbed quickly enough to avoid induction of foreign-body reaction.

The Effect of High Selenite and Selenate Concentrations on Ferric Oxyhydroxides Transformation under Alkaline Conditions.

Iron-based nanomaterials have high technological impacts on various pro-environmental applications, including wastewater treatment using the co-precipitation method. The purpose of this research was to identify the changes of iron nanomaterial's structure caused by the presence of selenium, a typical water contaminant, which might affect the removal when the iron co-precipitation method is used. Therefore, we have investigated the maturation of co-precipitated nanosized ferric oxyhydroxides under alkaline conditions and their thermal transformation into hematite in the presence of selenite and selenate with high concentrations. Since the association of selenium with precipitates surfaces has been proven to be weak, the mineralogy of the system was affected insignificantly, and the goethite was identified as an only ferric phase in all treatments. However, the morphology and the crystallinity of ferric oxyhydroxides was slightly altered. Selenium affected the structural order of precipitates, especially at the initial phase of co-precipitation. Still, the crystal integrity and homogeneity increased with time almost constantly, regardless of the treatment. The thermal transformation into well crystalized hematite was more pronounced in the presence of selenite, while selenate-treated and selenium-free samples indicated the presence of highly disordered fraction. This highlights that the aftermath of selenium release does not result in destabilization of ferric phases; however, since weak interactions of selenium are dominant at alkaline conditions with goethite's surfaces, it still poses a high risk for the environment. The findings of this study should be applicable in waters affected by mining and metallurgical operations.

Fungal-induced modification of spontaneously precipitated ochreous sediments from drainage of abandoned antimony mine.

Iron-containing spontaneously precipitated ochreous sediments serve as natural scavengers of various migrating elements and in this way contribute to removal and immobilization of potentially hazardous elements especially from mine drainage outflows. On the other hand, presence of filamentous fungi in their surroundings triggers biotransformation and contributes to the mobility of these elements. Three groups of samples of spontaneously precipitated ochreous sediments from an abandoned antimony mine in Poproc, Slovakia were studied: as-collected, sterilized at 95 °C for 30 min, and exposed to incubation with filamentous fungus Aspergillus niger which is frequently found in soils. Employing chemical analyses have determined the content of Fe, As, Sb, and Zn in the samples as well as their mobilization among the non-dissolved residue, culture medium of the fungus and/or its biomass. Significant degree of biovolatilization of antimony was unveiled. Speciation of iron was performed by 57Fe Mössbauer spectroscopy performed in a wide temperature range 300-4.2 K and external magnetic field of 6 T. Hyperfine interactions between 57Fe nuclei and their electronic shells have revealed superparamagnetic behavior characteristic for small particles. Their blocking temperatures of 46, 53, and 40 K, respectively, indicate a dependence of the size of the particles upon the sample treatment. While sterilization has supported their growth, incubation with fungus has changed their chemical environment and removed mainly bigger particles.

Time periods of GSR particles deposition after discharge-final results.

The elemental objects of the research study are: determination of time periods corresponding to gunshot residue particles (GSR) deposition after the shot from selected pistols and a revolver, and evaluation of the deposited particles number. For several shooting experiments were used a pistol CZ model 85, caliber 9 mm Luger with common ammunition 9 mm Luger FMJ Sellier & Bellot, a pistol CZ model 70, caliber 7.65 mm Browning (32 ACP) with common 7.65 mm Browning FMJ Sellier & Bellot ammunition and a revolver S&W Modell 60, barell length 2-1/8'', cal. .38 Special with common Sellier&Bellot (FMJ) ammunition. The results of the study have indicated the behavior of GSR particles deposited after a single discharge. The overall time interval of GSR particles deposition and the number of deposited particles with the above mentioned arms and ammunition were established. The results can potentially be used for clarifying the situation at crime scenes and for subsequent interpretation of GSR evidential value in caseworks.